Locker Assignment

I was absent on Friday when we did this assignment in class becuase I had to take an AP exam. I got as much done as possible, but it is not completely finished!!
Design Phase
Identify the Problem--

• Lockers are a mess, design something to help organize them. 

Investigate the CHS lockers--

• Regular Locker Dimensions
• Width-10 in.
• Height-17 in.
• depth-11 in.
• Football Locker Dimensions
• Width- 14 in.
• Height- 45.5 in.
• Depth- 17 in.

Brainstorm Solutions--

• Regular Locker:
• 1st:
• Have two shelves on the right side of the locker
• Have a hook on the inside on the left side for backpack
• 2nd:
• Have one shelf on the top and one shelf on the bottom
• 3rd:
• Have a drawer on the bottom for pencils and paper
• Have a shelf on the right side
• Have hooks on the left side for hanging
• Football Locker
• 1st:
• Have two shelves on the top on the locker for shoes, and padding
• Have a bar below those two shelves for jersey's
• 2nd:
• Have one shelf on the top and then another shelf on the bottom
• Have a bar below the top shelf

Sketch Three Possible Solutions (include labels and important dimensions)

 

Identify Criteria and Constraints

Criteria:

1. Design a locker on the CAD software

Constraints:

1. Design must fit within your school locker.

2. Easy to install.

3. Must hold 20 lbs of books and binders.
4. No flammable materials.

Select an Approach (justify selection with specifics)--

• Football locker
• One shelf on top for pads or helmet
• One shelf on bottom for shoes
• A bar below the top shelf for jersey, and jacket

Prototype Phase

Craft your design in CAD:

-Use an assembly of parts.

---Create an Isometric view of your assembly.

---Create a multiview drawing.

-----Label your multiview drawing with dimensions.

Each student will do their own CAD work (You may collaborate in and outside of your team but the actual work must be your own).